华为AP不能用AC管理器控制时,切换成FAT模式

小七夕 1年前 ⋅ 6004 阅读
本设备支持FAT模式(FAT模式下可单独工作)
如要切换为FAT模式,请参考技术支持网站 http://support.huawei.com/enterprise/zh/doc/DOC1000167230 上的对应产品的升级指导文档。
本设备支持云模式(需要使用华为云管理平台进行管理)
如果切换为云模式,请参考华为技术支持网站 http://support.huawei.com/enterprise/zh/doc/DOC1000167230 上的对应产品的升级指导文档。

配置出厂FIT AP一键切换FAT模式示例

配置步骤

  1. 环境准备

     

    本举例使用如下环境进行说明,实际操作中请根据实际情况替换。

    设备

    描述

    PC

    操作系统:Windows7

    Stelnet终端软件:Putty(第三方软件)

    AP

    款型:AP4050DN

    版本:V200R007C20

    默认信息:

    • IP:169.254.1.1
    • 用户名:admin
    • 密码:admin@huawei.com
    • Stelnet登录端口号:22

     

  2. 通过命令行方式登录AP

     

    # 在PC上打开Putty软件,输入AP的IP地址和端口号,选择SSH方式,单击 “Open”。如果出现密钥对信息提示,单击 “Yes”。

     

    # 看到如下登录信息表示连接AP成功,输入AP的用户名和密码后,登录成功。

    login as: admin
    Further authentication required
    admin@169.254.1.1's password:admin@huawei.com  //为保障信息安全,实际输入的密码字符不可见
    
    Info: Current mode: Fit (managed by the AC).  //当前是FIT模式
    Info: You are advised to change the password to ensure security.
    <Huawei>

     

  3. 开始切换

     

    # 将AP切换为FAT模式,等待AP重启完成。

    <Huawei> system-view
    [Huawei] ap-mode-switch fat
    Warning: The system will reboot and start in fat mode of V200R007C20SPCa00. Continue? (y/n)[n]:y
    Info: system is rebooting ,please wait.................

     

  4. 切换后检查

     

    # 再次登录AP,查看AP信息,已工作在FAT模式。

    login as: admin
    Further authentication required
    admin@169.254.1.1's password:admin@huawei.com
    
    Info: Current mode: Fat (working independently).
    Warning: The default country code is CN. Ensure that AP radio attributes comply 
    with laws and regulations in different countries. Do you want to change the 
    country code? [Y/N]:n
    Info: You are advised to change the password to ensure security.
    <Huawei> system-view
    [Huawei] display  version
    Huawei Versatile Routing Platform Software
    VRP (R) software, Version 5.170 (AP4050DN FAT V200R007C20SPCa00)
    ...

注意:本文归作者所有,未经作者允许,不得转载

全部评论: 0

    我有话说: